FAP Tile Paste can be used for fixing ceramic tiles in bathrooms, kitchens, toilets, floorboards, etc. It can also be used as an adhesive compound for fixing polystyrene tiles.
Color : Off white
Appearance : Paste
Flash Point : Not applicable
The surface to be tiled must be flat, clean, dry free of oil, grease, dust etc. Newly plastered areas should be left for complete curing to develop sufficient strength to support the weight of the tiles. Board or timber surfaces must be dry, rigid and flat.
Application: Stir well before use. Work at maximum area of 1m2 at a time Apply the material to the substrate to a thickness of 3 mm forming a continuous horizontal rib with a notches trowel. Start at the bottom of the wall, press the tiles firmly in to the correct position, leaving 1-2 mm space between the tiles for grouting purpose. Wipe off any surplus material immediately with a damp cloth. Complete each 1 m2 before commencing the next section. Where areas need extra strength, adhesive can be applied to the back of the tiles. After a minimum of 24 hours, the gaps between the tiles can be grouted with FAP Tile Joint.
1 kg of FAP Tile Paste covers 1 m2 depending on the surface and the application.
Up to 12 months in unopened containers stored at standard storage condition.
Clean all tools with water after use.
Available in 5kg & 25 kg pails.
As with all chemical products, caution should always be exercised. Protective clothing such as gloves and goggle should be worn. Should any of the products be accidentally swallowed, do not induce vomit but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and content details. Reseal all containers after use and ensure that the product is stored as instructed on the safety section of the labeling.